by Ed Skilling
"Black Boxes" used in psychotronics networks throughout the world in the past 65 years have used variations of radio type components as tuning devices, mostly resistance decade boxes that change values by 10. Capacity tuners that change capacitance by rotating plates are in vogue at present but are now being replaced by digital electronics in computer type devices. The newer devices using digital systems appear to give faster data and with greater accuracy in the readout. It is quite difficult to argue with the value of a digital number displayed in the reading.
The variable capacitors for building copies of the older devices are becoming scarce. The capacitance tuners cannot compete with digital numbers in accuracy. The weakest point in all the hardware is the detector that tells the operator the final result. A rub-plate or pendulum is not viewed as scientific by the scientific community whose acceptance is needed to get the recognition it deserves. It is a known fact that a box with nothing but numbered dials will perform if the user "believes" and uses the hardware as a concentration intensifier. The computer device simplifies the task for the operator by its storage ability for the large number of rates used as reference. The computer still requires training for a beginner in the art. The computer is still beyond the means for the average person who may be interested in this field.
My belief is that most people desire to see the world rid of the crippling diseases. Many good people get in trouble with these devices by treating ill people and this is considered to be practicing medicine without a license. Keep in mind that one can still treat themselves without a license. Keep in mind that one can still treat themselves without getting into trouble with any method.
In my personal experience of many years in fabricating devices of all types including devices using these subtle energies we have found that almost any type of radionic device will work if one has the "belief", or faith in whatever one desires. A great desire of mine for many years is to build the ultimate unit with an automatic readout. At the start of this year 1987 we have been involved in the development of a device using the light spectrum for the carrier frequency of the radionic signal. In doing this research we also are working to achieve the ultimate detector with digital readout. The area of greatest interest is the ultraviolet spectrum in the wavelength of 50 to 3900 Angstroms. To make clear what we are about to discuss in this spectrum we will define some terms taken from a book titled "OPTOELECTRONICS" by Robert G. Seippel.
1. Infrared -- Band of light wavelengths that is too long to be seen by the human eye.
2. Visible -- Band of light wavelengths that the human eye responds to.
3. Ultraviolet -- Band of light wavelengths that is too short for the human eye to see.
(1 Micron = 10,000 Angstroms)
|ULTRAVIOLET||0.005 to 0.39 Microns|
|VISIBLE||0.39 to 0.75 Microns|
|INFRARED||0.75 to 4000.00 Microns|
OPTICAL COLORS AND THEIR WAVELENGTHS IN MICRONS - VISUAL RESPONSE:
|VIOLET||0.40 - 0.45|
|BLUE||0.45 - 0.50|
|GREEN||0.50 - 0.57|
|YELLOW||0.57 - 0.59|
|ORANGE||0.59 - 0.61|
|RED||0.61 - 0.70|
ACTION OF LIGHT ON MATERIALS: All material does not "see" light in the same manner. There are basically different light-receptor materials. These are opaque, transparent and translucent. Opaque = no see, transparent = all see, and translucent = see partially.
RADIANT ENERGY = Photons -- the higher the frequency the higher the radiant energy which means the maximum photons that will be produced.
In 1985 we spent a great deal of time and effort in exploring beyond microwaves. We used the infrared band by using the heat produced by the vasodilation of the capillaries in the palm of the hand. The detector would respond to a mental thought but was a few milliseconds slower than the mental response. So! Back to the drawing board. Now we are into the ultraviolet band. To begin in this part of the spectrum we chose to use the low end of the band that we could see with the normal human eye response.
To test our intuitive hunch we designed a glass tube in the shape of a U to accommodate a sensor in the center of the U shape. To produce the desired bandwidth in ultraviolet it would require a tube using argon gas. This gas gave us the plasma to produce the carrier signal. A local neon sign glass blower fabricated our design. To ionized the gas requires 1500 volts at 9 Milliamperes which is well within the capacity of a small neon sign transformer.
The next task was the need for a light-tight box to eliminate all light except the ultraviolet. The UV is used to reflect the photon energy from a photograph. This box now becomes a unique "well". The well in this concept is actually a sliding drawer that any type of material can be analyzed by converting the signal produced by the reflected UV light. The light energy photons are sensed and converted into digital pulses and then read by a digital display. The signal, along with the subtle energy of radionics carried by the UV photon energy, is processed by additional circuits to indicate the final reading of the resultant action produced by the photon energy of the ultraviolet.
After construction of the completed assembly with the UV tube and associated electronics it was ready for the first test by a person other than myself who would not be influenced by my predicted thought processes of the results. (Our policy in testing this type of equipment is to use the best experts in the field to determine if the device will perform to the design criteria which by-passes the designer. Our person spent the better part of the day putting the equipment through the test operation and we were excited to learn that it met all the design expectations. Our expert associate used a digital SE 5 to check the results. Many hours of testing indicated that we were on the right track in using ultraviolet for a carrier frequency. The new equipment was fast in producing the desired results.
The first testing was accomplished in the early part of the month of June, of this year 1987. A second unit was constructed and sent to our expert associate who has been using the unit daily since then. At the present point in time continued testing indicates that the UV unit is working at a cellular level rather than the conventional devices that work on the organs of the body.
All reports indicated that this concept in the field of radionics is superior to any device in the marketplace today. Our desire is to be able to make this technology available to the serious researcher who desire to experiment with this type of equipment for their personal use, keeping in mind that it is not approved by the medical profession.
We would like to share the information with the Associates of the BSRF group by publishing the information as it develops and to make available the components required to fabricate a complete instrument to research this radiant energy field.
The current plan is to produce the device in a modular form. As an example the first phase will be to provide construction information to fabricate the UV section in a container that can tie into existing radionics devices.
Complete assemblies can be made available if the Associates are interested in this concept.
END OF PART ONE
- Seippel, Robert G. Optoelectronics. Reston, Va: Reston Pub. Co, 1981. Print. <http://amzn.to/NQiA93>